Multi-Point Inspection

Multi-Point Inspection & Maintenance

A multi-point inspection is a comprehensive vehicle assessment including primary systems and components. The Acura multi-point inspection is designed to detect reliability and safety threats while fixing minor problems before they cause bigger problems down the road. Multi-point inspections are recommended at service intervals found in the owner’s manual, or sooner if performance problems develop. The ideal location to get an Acura multi-point inspection is a certified Acura service department that understands your vehicle and its mechanics inside and out.

Multi-Point Inspection Service Overview

We complete the inspection with the Acura checklist that is organized by vehicle area. Here is an overview of the areas and components inspected:

• Interior/Exterior – This section focuses on inspecting the internal controls and exterior signals and lights. We check all lights, windshield wiper blades, and glass conditions. We check that the horn works and confirm HVAC system performance. We also check the cabin air filter, window/sunroof, and the rear-view camera.
• Advanced Technology – We check advanced technologies including warning lights and mirror operation. We check all systems’ warning lights including VSA, ABS, MIL, SRS, TPMS, and cluster bulbs.
• Battery – We inspect and test the battery’s electrical performance.
• Tires – We perform a thorough tire inspection for irregular wear and measure the tread depth for all tires.
• Under the Hood – We pop the hood to check engine compartment mechanics, fluids, and filters. We check the drive belts and coolant hoses. We check all fluid levels including windshield washer, coolant power steering, brake, and auto transmission. We also check the engine air filter.
• Under the Vehicle – We inspect underneath the vehicle including the braking components, exhaust, steering/suspension, transmission, and differential.